Migrating from PIX 506E to ASA 5510

[waynehill1]

I'm trying to migrate from our old PIX 506E to an ASA 5510. I've had outbound traffic working find, but inbound I cannot get to work. We have only 1 external address, so we are port forwarding inbound smtp, http, etc.

Thank you for any help.

[acomiskey · Accepted solution]

Use "interface" instead of xxx.xxx.xxx.1 when xxx.xxx.xxx.1 is outside ip address.

static (inside,outside) tcp interface www 10.10.0.2 www netmask 255.255.255.255

Please rate if it helps.

[waynehill1]

Thank you for the reply, and quick answer!!

[JORGE RODRIGUEZ]

Waynehill,

Refer to this link and select Port Redirection forwarding, you need this configuration if you only have one public IP and want to have several servers answer on different TCP port services.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708b4.shtml#t12

Jorge