Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Migrating from PIX 506E to ASA 5510

I'm trying to migrate from our old PIX 506E to an ASA 5510. I've had outbound traffic working find, but inbound I cannot get to work. We have only 1 external address, so we are port forwarding inbound smtp, http, etc.

Thank you for any help.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: Migrating from PIX 506E to ASA 5510

Use "interface" instead of xxx.xxx.xxx.1 when xxx.xxx.xxx.1 is outside ip address.

static (inside,outside) tcp interface www 10.10.0.2 www netmask 255.255.255.255

Please rate if it helps.

3 REPLIES
Green

Re: Migrating from PIX 506E to ASA 5510

Use "interface" instead of xxx.xxx.xxx.1 when xxx.xxx.xxx.1 is outside ip address.

static (inside,outside) tcp interface www 10.10.0.2 www netmask 255.255.255.255

Please rate if it helps.

New Member

Re: Migrating from PIX 506E to ASA 5510

Thank you for the reply, and quick answer!!

Re: Migrating from PIX 506E to ASA 5510

Waynehill,

Refer to this link and select Port Redirection forwarding, you need this configuration if you only have one public IP and want to have several servers answer on different TCP port services.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708b4.shtml#t12

Jorge

240
Views
0
Helpful
3
Replies
CreatePlease to create content