06-11-2007 12:14 PM - edited 03-11-2019 03:28 AM
I'm trying to migrate from our old PIX 506E to an ASA 5510. I've had outbound traffic working find, but inbound I cannot get to work. We have only 1 external address, so we are port forwarding inbound smtp, http, etc.
Thank you for any help.
Solved! Go to Solution.
06-11-2007 12:51 PM
Use "interface" instead of xxx.xxx.xxx.1 when xxx.xxx.xxx.1 is outside ip address.
static (inside,outside) tcp interface www 10.10.0.2 www netmask 255.255.255.255
Please rate if it helps.
06-11-2007 12:51 PM
Use "interface" instead of xxx.xxx.xxx.1 when xxx.xxx.xxx.1 is outside ip address.
static (inside,outside) tcp interface www 10.10.0.2 www netmask 255.255.255.255
Please rate if it helps.
06-12-2007 04:50 AM
Thank you for the reply, and quick answer!!
06-11-2007 01:05 PM
Waynehill,
Refer to this link and select Port Redirection forwarding, you need this configuration if you only have one public IP and want to have several servers answer on different TCP port services.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708b4.shtml#t12
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide