cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
333
Views
0
Helpful
1
Replies

Migrating from PIX version 6.x to 891 ISR

paultribe
Level 1
Level 1

Does anyone have information on how to migrate a PIX version 6.3 on to a Cisco 891 router. At the very least I need to know how to configure the following features:

  • Firewall.
  • NAT and PAT.
  • Static NAT with port numbers.
  • Remote Access VPN.
  • Site to Site VPN.
  • Spli Tunnelling.
  • AAA Radius Authentication.

Does the 891 support Static NAT with port numbers.

Thanks

Paul

1 Reply 1

Panos Kampanakis
Cisco Employee
Cisco Employee

Firewall

Look into Zone Based Firewall http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a008060f6dd.html

NAT and PAT.

Static NAT with port numbers.

NAT on IOS is different. I would suggest to look into ip nat command in IOS and the config guides

Remote Access VPN.

Site to Site VPN.

Spli Tunnelling.

http://www.cisco.com/en/US/docs/security/vpn_modules/6342/vpn_cg.html

AAA Radius Authentication.

http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_aaa_overview_external_docbase_0900e4b1805adb64_4container_external_docbase_0900e4b1807af93e.html

I hope it helps.

PK

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: