Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Migrating from PIX version 6.x to 891 ISR

Does anyone have information on how to migrate a PIX version 6.3 on to a Cisco 891 router. At the very least I need to know how to configure the following features:

  • Firewall.
  • NAT and PAT.
  • Static NAT with port numbers.
  • Remote Access VPN.
  • Site to Site VPN.
  • Spli Tunnelling.
  • AAA Radius Authentication.

Does the 891 support Static NAT with port numbers.

Thanks

Paul

1 REPLY
Cisco Employee

Re: Migrating from PIX version 6.x to 891 ISR

Firewall

Look into Zone Based Firewall http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a008060f6dd.html

NAT and PAT.

Static NAT with port numbers.

NAT on IOS is different. I would suggest to look into ip nat command in IOS and the config guides

Remote Access VPN.

Site to Site VPN.

Spli Tunnelling.

http://www.cisco.com/en/US/docs/security/vpn_modules/6342/vpn_cg.html

AAA Radius Authentication.

http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_aaa_overview_external_docbase_0900e4b1805adb64_4container_external_docbase_0900e4b1807af93e.html

I hope it helps.

PK

222
Views
0
Helpful
1
Replies
CreatePlease login to create content