Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Multiple Context - Changing http server port

Hi,

Is it possible to change the firewall https port to different port? Normally in single context mode you can change it with this command.

http server enable 4434

In multiple context mode there is no option for the port...

http server enable ?

5 REPLIES

Re: Multiple Context - Changing http server port

Hi,

Yes, you should be able to change it to a different port number either from single or multiple mode.

Make sure you're in the "admin" context to make such a change.


Sent from Cisco Technical Support iPhone App

New Member

Multiple Context - Changing http server port

I am in the admin context but still there is no option for port setting.

VIP Green

Multiple Context - Changing http server port

I think that is the problem, you are in the admin context.  From my understanding the admin context is just used for administration and therefore the need to use different ports for ASDM is not needed (as 443 is used by HTTPS traffic to the internet).  However, if you go to one of the other contexts and issue the http server enable ? command you will see that you are now able to enter a port other than the default.

--
Please remember to rate and select a correct answer

--

Please remember to rate and select a correct answer

Multiple Context - Changing http server port

hi marius,

i just tried this on our live ASA 5520 and you're right, it can't be done on admin context.

it also can't assign a diffrent port under a different context. only default 443 is accepted.

ciscoasa/admin(config)# ip http serve enable ?

ERROR: % Unrecognized command

ciscoasa/CONTEXT(config)# sh ve

Cisco Adaptive Security Appliance Software Version 8.3(2)

Device Manager Version 6.3(5)

ciscoasa/CONTEXT(config)# http server enable ?

configure mode commands/options:

 

New Member

Multiple Context - Changing http server port

Yes in both context you cannot change the port.

275
Views
0
Helpful
5
Replies
CreatePlease to create content