I have a Cisco ASA5510 firewall edition,Interface E0/0 (outside) is connected to Internet,Interface E0/1 (Inside) is connected to LAN switch,Interface E0/2 (Traffic2) is connected PE router of the MPLS Cloud,Routing is done in the MPLS cloud for both side LANs.
Now from my firewall I am able to ping the other side MPLS PE router IP address..
But from my LAN I am not able to PING the other side PE router IP address.
I have checked using extended PING,that is from the Inside Interface E0/1 to Interface E0/2,it is not pinging,What could be the problem?I have configured ACL name called TRAFFIC2 to allow the traffice from the LAN to other side MPLS WAN and then to the other side LAN and vise versa.
I have applied the ACCESS-GROUP TRAFFIC 2 in interface TRAFFIC2.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...