Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Multiple static routes

Hello Experts,

Does multiple static route to same destination with a different metric on a PIX 515E works same way as the floating static route on a router ?

For Example(Can u use follwoing static route and obtain same results as the floating static route on a router):

route intf 2 192.168.1.0 255.255.255.0 172.16.1.1 1

route intf 2 192.168.1.0 255.255.255.0 172.31.1.1 100

1 REPLY

Re: Multiple static routes

Lets clear up something quick. The second route would NEVER be used. You need to be running a routing protocol to be able to use the floating static route ('cause you set set it a bit higher than the routing protocols administrative distance). That being said, the answer to your question is no (because of the two static routes), but it can be yes if you enable a routing protocol and you set your static route with the proper AD.

HTH and please rate.

304
Views
0
Helpful
1
Replies
CreatePlease to create content