Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

NAT 2 external addresses to 1 internal address

Hello,

Does anyone know if this is possible and how ?

static (inside,outside) 1.1.1.1 10.0.0.1

static (inside,outside) 1.1.1.2 10.0.0.1

is not allowed.

Any other way ?

thx Karien

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: NAT 2 external addresses to 1 internal address

Hi,

You can do this with policy NAT. This doc explains

"Translate Multiple Global IP Addresses to a Single Local IP Address using Static Policy NAT"

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807d2874.shtml

Regards

3 REPLIES
New Member

Re: NAT 2 external addresses to 1 internal address

I don`t know is possible or not, but you can -

nat (inside) 1 1.1.1.0 255.255.255.252

global (outside) 1 10.0.0.1 netmask 255.255.255.255

Bronze

Re: NAT 2 external addresses to 1 internal address

Hi,

You can do this with policy NAT. This doc explains

"Translate Multiple Global IP Addresses to a Single Local IP Address using Static Policy NAT"

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807d2874.shtml

Regards

275
Views
0
Helpful
3
Replies
CreatePlease to create content