Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT and accessing an externaly published service from inside

Is it possible to have users on the inside interface of an ASA access a service sourced from their inside local IP address by going to the Public IP address (outside)global. I know I can do this on a router, but I haven't been able to get it to work on an ASA.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: NAT and accessing an externaly published service from inside

Yes, this is possible.

same-security-traffic permit intra-interface

global (inside) 1 interface

nat (inside) 1 0 0

static (inside,inside) netmask 255.255.255.255

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml#solution2

3 REPLIES
Green

Re: NAT and accessing an externaly published service from inside

Yes, this is possible.

same-security-traffic permit intra-interface

global (inside) 1 interface

nat (inside) 1 0 0

static (inside,inside) netmask 255.255.255.255

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml#solution2

New Member

Re: NAT and accessing an externaly published service from inside

That was exactly what I was looking for thanks

New Member

Re: NAT and accessing an externaly published service from inside

Hi,

I exactly want to do this on a Cisco router but am not able to. Could you enlighten me on this?

119
Views
0
Helpful
3
Replies
CreatePlease to create content