Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT and IPSEC

Hi guys,

Please can someone assist with the following issue. i dont know why only one machine in the 10.10.10.x range passes traffic via the tunnel while the rest does not. I have the following nat policy configured

nat (inside) 1 access-list xxx

global (outside) 1 200.200.200.1-200.200.200.30 netmask 255.255.255.0

access-list xxx permit ip 10.10.10.x 255.255.255.0 50.50.x.x 255.255.0.0

access-list crypto permit ip 200.200.200.0 255.255.255.0 host 50.50.50.5

isakmp nat-traversal 20

sysopt connection permit-vpn

1 REPLY
Bronze

Re: NAT and IPSEC

Refer to the documnet present in the following url which explains configuring IPSEC using NAT:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008045a2d2.shtml

105
Views
0
Helpful
1
Replies
CreatePlease to create content