08-20-2013 03:29 AM - edited 03-11-2019 07:27 PM
What we want to do is translate ALL destination address from whatever DA is to 200.2.162.130
08-23-2013 10:29 AM
What version ASA are you running?
08-25-2013 04:22 AM
Hi Marius, using code ASA 8.4.
Thanks,
Vijayakumar G
08-25-2013 11:48 AM
Hello Vijay,
You can do it with no problem at all, the restriction with NAT on transparent mode is : You cannot NAT the traffic to any of the Interfaces of the ASA.
So just do a NAT as you would normally do
object network Outside_IP
host 200.2.162.130
exit
nat (inside,outside) source dynamic any Outside_IP
That´s it!!
Check my blog at http:laguiadelnetworking.com and subscribe so you can get daily information about networking.
Cheers,
Julio Carvajal Segura
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: