Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Nat in Transparent Firewall

nat in transparent firewall.png

What we want to do is translate ALL destination address from whatever DA is to 200.2.162.130

Everyone's tags (1)
3 REPLIES
VIP Green

Nat in Transparent Firewall

What version ASA are you running?

-- Please remember to rate and select a correct answer

Nat in Transparent Firewall

Hi Marius, using code ASA 8.4.

Thanks,

Vijayakumar G

Nat in Transparent Firewall

Hello Vijay,

You can do it with no problem at all, the restriction with NAT on transparent mode is : You cannot NAT the traffic to any of the Interfaces of the ASA.

So just do a NAT as you would normally do

object network Outside_IP

host  200.2.162.130

exit

nat (inside,outside) source dynamic any Outside_IP

That´s it!!

Check my blog at http:laguiadelnetworking.com  and subscribe so you can get daily information about networking.

Cheers,

Julio Carvajal Segura

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
942
Views
0
Helpful
3
Replies