I am connecting with ANYconnect SSL VPN Client from the Internet and it connects fine.
When I try to ping or connect to an internal server -
Here is the message that I am getting:
%ASA-3-305005: No translation group found for tcp src outside:192.168.3.1/1338 dst inside:192.168.10.35/80
3.1 is the VPN client connection, 10.35 is the www server.
When I tried to connect externally, back out to the INnternet I got a similar message and it would not connect.
However, when I added : nat (outside) 1 SSLVPN 255.255.255.0
I was able to connect to google.com and others. Still not to any internal addresses however.
I have tried every other nat config statement I could come up with to get connectivity to the inside addresses: 1.0
Any ideas, seems like it should be pretty easy but I can't seem to come up with the right combo tonight.
same-security-traffic permit intra-interface access-list cisco_splitTunnelAcl standard permit any access-list inside_access_in extended permit ip any any access-list inside_access_in_1 extended permit ip any any
ip local pool SSLVPN-Pool 192.168.3.1-192.168.3.254 mask 255.255.255.0
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...