Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT issue

Hi all,

I have an 5540 ASA

I would like to NAT the packtes this way:

ORIGINAL PACKET

source: 192.168.0.10

destination: 10.10.10.50

TRANSLATED PACKET

source: 172.16.0.10

destination: 20.20.20.50

Is this possible?

I always NAT the packet modifying only the source of translated packet...and now I`d like modifying the source and the destination of the translated packet.

Thanks

2 REPLIES
Hall of Fame Super Blue

Re: NAT issue

Assuming the traffic flow is from inside to outside ie. source 192.168.0.10 is on inside and destination 10.10.10.50 is on outside

(if it's not you can just adjust)

static (inside,outside) 172.16.0.10 192.168.0.10 netmask 255.255.255.255

static (outside,inside) 10.10.10.50 20.20.20.50 netmask 255.255.255.255

Jon

New Member

Re: NAT issue

Hi Jon,

thanks for your help.

This was exactly what I wanted.

Regards

105
Views
5
Helpful
2
Replies
CreatePlease to create content