Our LAN 192.168.10.x is connected via leased line to our HQ 10.130.10.0/24.. Now we need connect partner network with our pix and partner has same IP like our HQ.. This is logical layout (in the fact PIX is not connected directly to router they have just inside ports in same VLAN, router is our GW)
I need configure nat on pix (6.3(5)) to be partner network translated to 192.168.11.x and on router only configure static route (192.168.11.x via PIX)
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...