I have an ASA that is configured with the following...
Inside IP: 192.168.1.0/24
DMZ IP: 184.108.40.206/24
Outside IP: 220.127.116.11/30
*All IPs are fictious of course*
Currently my ASA is configured to NAT all inside IPs to the outside interface. My plan is to change the outside interface to a Private IP address, as I'm looking to put a router infront of it. Instead of NAT'ing to the outside interface, can I NAT to a free IP in my 18.104.22.168/24 block? If so, what would be the desired configuration?
global <?> 1 22.214.171.124.....?...not sure on the syntax. Looking for assistance on that as well
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...