Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Natting on ASA

Hi,

We having Ethernet connectivity terminated on Cisco 5520 ASA firewall. 172.16.100.15/28 IP pool is allotted by our provider for the connectivity.

172.16.100.16 is configured at Provider’s router interface.

172.16.100.17 is configured at our ASA firewall WAN

Apart from above we having a another pool of 192.168.40.0/24 , which we are using for our internal LAN connectivity/servers.

We want to NAT/Map one of the IP from Providers IP pool (for eg- 172.16.100.18) with one of our LAN IP/server (192.168.40.4) & 172.16.100.19  with 192.168.40.6

Requesting to share the commands to do the same..

***

1 REPLY
Cisco Employee

Re: Natting on ASA

static (inside,outside) 172.16.100.18 192.168.40.4 netmask 255.255.255.255

static (inside,outside) 172.16.100.19 192.168.40.6 netmask  255.255.255.255

369
Views
0
Helpful
1
Replies
CreatePlease to create content