Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need help figuring out NAT config issue on ASA 8.0

Here's the scenario:

ASA 8.0(4)23

Config element of interest:

static (Inside,Outside) HQMNExchange1-Global HQMNExchange1-LOCAL netmask 255.255.255.255

HQMNExchange1-Global refers to a publicly routable IP address.

HQMNExchange1-LOCAL has the IP address 10.10.5.27 and is, of course, off the Inside interface of the ASA.

I have a wireless network located off the "Inside" interface of the ASA.  The clients on this network use a public DNS server for name resolution.  When they try to connect to a website on the HQMNExchange1-Global system the connection attempt fails.  Coming from the outside works and connecting to the system using the inside local IP address instead of the inside global IP address works.  If they try to connect to the Inside Global IP address from the inside it does not work.

What should I be looking at?

Thanks,

Steven

Everyone's tags (8)
1 REPLY

Need help figuring out NAT config issue on ASA 8.0

Hello,

You will need the following:

global (outside) 1 interface

same-security-traffic permit intra-interface

static (inside,inside)   HQMNExchange1-Global HQMNExchange1-LOCAL

Do rate all the helfpul posts

Julio

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
277
Views
0
Helpful
1
Replies