Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need help in configuration of transparent firewall

I have configured pix 525 with ios version 7.2 in transparent mode ,Kept both interfaces in different vlan & Allowed any to any traffic through firewall ...

Following are the observations -

=> As per rule arp request is passing through firewall & i am getting arp of all connected devices

=> Able to ping both side devices from inside firewall & same vice-versa (which are in same ip range)

Till its ok ....But

=> i am not able to ping from one vlan to other vlan ,we are running ospf on both side ,OSPF updates are not passing through transparent firewall

Firewall config -

#firewall transparent

#ip address 1.1.1.1 (managment purpose )

#access-list 100 permit ip any any

#access-group 100 in/out int inside

#access-group 100 in/ot int outside

1 REPLY
New Member

Re: Need help in configuration of transparent firewall

140
Views
0
Helpful
1
Replies