Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need Help with FWSM on 6500 and removing a vlan from FWSM

I created a vlan 102 on the 6500 and then added it to vlangroup 1 and set it up to the FWSM with "firewall module 7 vlan-group 1". I then created the SVI on the FWSM with the IP and Stanby IP as I have a active and standby blade in 2 different chassis.

Now I need to delete the VLan 102 from the FWSM and the vlan group 1.

I was able to delete the interface but cannot delete the vlan 102 from the vlan group...

How is this done?

2 REPLIES
New Member

Re: Need Help with FWSM on 6500 and removing a vlan from FWSM

never mind

New Member

Re: Need Help with FWSM on 6500 and removing a vlan from FWSM

Hi,

To Delete the Vlan from Vlan Group 1, use the following commands in your 6500,

no firewall vlan-group 1 102

This will remove only vlan 102 from the list.

Try this and respond.

Thanks,

Sudheesh

162
Views
0
Helpful
2
Replies
CreatePlease to create content