Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Need lab recommendation

I want to get me CCNA Security certification and would like your suggestions for a home lab.  I DO NOT want to use GNS3.  Should I get an ASA too?  I learn from hands on and have about 900 to spend on a lab. 

Thank you for your ideas!

Michael

PS: I do not have any equipment yet.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Need lab recommendation

Hi,

If you have a current CCNA RS lab it will be easier to do an upgrade to CCNA Security.

You'll need a couple of 1841s and 2950 or 2960 switches depending on your budget.
I always check out this site for lab setup/kits:

http://www.certificationkits.com/how-to-ccna-security-lab/

Personally, I've got an ASA 5505, few 1841s, an 8-port 3560 and 2960.

Sent from Cisco Technical Support iPhone App

2 REPLIES

Re: Need lab recommendation

Hi,

If you have a current CCNA RS lab it will be easier to do an upgrade to CCNA Security.

You'll need a couple of 1841s and 2950 or 2960 switches depending on your budget.
I always check out this site for lab setup/kits:

http://www.certificationkits.com/how-to-ccna-security-lab/

Personally, I've got an ASA 5505, few 1841s, an 8-port 3560 and 2960.

Sent from Cisco Technical Support iPhone App

Community Member

Re: Need lab recommendation

Thansk for the information above .

Michael

160
Views
0
Helpful
2
Replies
CreatePlease to create content