Need to allow TLS_DH_anon_WITH_RC4_128_MD5 in ASA what is the command to do so
Recently we had issue in Microsoft Office communicator, users were not able to share their desktops however the ports are enabled. A microsoft has said that this Cipher suit is normally blocked in firewall and we have to enable it ( TLS_DH_anon_WITH_RC4_128_MD5 ).
Need to allow TLS_DH_anon_WITH_RC4_128_MD5 in ASA what is the co
If you are actually doing this from one interface to another you should see what the ASA is dropping and in that case enable logs at debugging level through ASDM and or CLI and filter our the IP address that is generating the traffic.
If you need assistance on this please let me know.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...