Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Netflow on FWSM

We integrated FWSM into 6509 and it is doing the routing. Is there a way to get Netflow data from FWSM? Is netflow supported on FWSM?

Thanks.

Vinh

2 REPLIES
Cisco Employee

Re: Netflow on FWSM

Hi,

NETFlow is not supported on the FWSM. You could use the SUP on the Catalyst 6509 to do NETFlow.

Please refer the below URLs for configuration details:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/nde.html

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/nde.html

I hope it helps.

Regards,

Arul

** Please rate all helpful posts **

New Member

Re: Netflow on FWSM

Thanks for letting me know. I wasn't able to get outbound netflow data from 6509 with SUP 720 because the ip of the gateway of the vlans is defined on the FWSM. In order to get netflow on 6509, each Vlan interface needs to have an ip address.

Vinh

353
Views
9
Helpful
2
Replies