What am I missing to ping from my own MYASA to the interfaces below?
! interface GigabitEthernet0/0 nameif internal security-level 100 ip address 188.8.131.52 255.255.255.0 MYASA# sh run int g0/2 ! interface GigabitEthernet0/2 nameif dmztest security-level 0 ip address 184.108.40.206 255.255.255.0 MYASA# ping 220.127.116.11 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 18.104.22.168, timeout is 2 seconds: No route to host 22.214.171.124
Success rate is 0 percent (0/1) MYASA# ping 126.96.36.199 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 188.8.131.52, timeout is 2 seconds: No route to host 184.108.40.206
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...