Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

no nat how can chek it is running

Dear after i install this configuration:

inside network 10.10.10.0/24

outside network 136.136.32.0/24

!

!CLI

!ACL to bound the network

access−list 107 permit ip 10.10.10.10 255.255.255.0 136.136.32.0 255.255.255.0

!

!nat0 is no-nat command

nat (inside) 0 access−list 107

how can i made the test?

1 REPLY
Gold

Re: no nat how can chek it is running

show xlate

show access-list

You know that anything specified by access-list 107 will NOT be nat'ed, right?

120
Views
0
Helpful
1
Replies
CreatePlease to create content