Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No ping in pix 506e in password recovery procedure

I was following the procedure for recovering password in pix 506e but something not working when I assign for example

192.168.1.1 for pix and

192.168.1.2 for pc

and connecting them with a cross cable no one of both interfaces can ping to my pc

and my pc wont see them

I need help for this little situation and I will be thankfull for any idea

1 REPLY

Re: No ping in pix 506e in password recovery procedure

Hi .. if you have followed the below procedure. Then that is all you need. Just make sure you download the correct .bin file according to the version code you are running. Also make sure you are testing the correct interface .. you could be connecting to another a different interface instead of the one you configured the IP address to or even pehaps the cross over cable could be faulty.

http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml

I hope it helps .. please rate it if it does !!!

417
Views
0
Helpful
1
Replies