Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Not able to browse the internet through PIX 506e / 515e

HI,

I am installing PIX 515e through the PDM.

Looks like I have entered all the required information correctly but still not able to access the internet.

The router is working fine and I am able to access the internet if I connect my pc, with a range of the public IP address, directly to the switch to which the router is connected.

Host Configuration:192.168.0.10 / 24 gateway - 192.168.0.1 ( Firewall Internal IP)

Firewall configuration: E1 - 192.168.0.1

E0 - A.B.C.D1

Router configuration: E0: A.B.C.D6.

S0: A.B.C.DD.

With all the configurations done I am still not able to browse the internet.

What rules I need to set on the firewall box?

Access list?

NAT?

Could someone help me?

Regards

Vik

3 REPLIES
Cisco Employee

Re: Not able to browse the internet through PIX 506e / 515e

send me following output from Pix

sh nat

sh global

sh route

sh access-g

New Member

Re: Not able to browse the internet through PIX 506e / 515e

Hi

You have to enable NAT, basically it is PAT using NAT and GLOBAL commands.

For example using CLI:

nat (inside) 1 0.0.0.0 0.0.0.0

global (outside) 1 interface

Also add

route outside 0.0.0.0 0.0.0.0 A.B.C.D6

hope this helps.

rgds

New Member

Re: Not able to browse the internet through PIX 506e / 515e

Hi,

Thanks Buddy. It solved my problem. Global and Nating was missing.

I tried to do same kind of nating through the PDM but it didnot accept...no clues why? Never thought of entering through the CLI.

ANyways. Really appriciate.

Thanks...to all fo you guys...god bless you.

93
Views
5
Helpful
3
Replies