Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Not able to connect from outside IP

Hi, the Firewall configuration is attached

When I try to access by remote desktop from outside IP to 196.44.242.51 Server (vrw-appdb-001) then I am not able to connect. Please check above config if you find anything wrong then please let me know.

4 REPLIES

Re: Not able to connect from outside IP

Hi ray

Please rate the posts which helped you in the previous questions you have asked. Rating does not cost any fee.

http://forums.cisco.com/eforum/servlet/NetProf?page=help_rating

Regards

New Member

Re: Not able to connect from outside IP

Ray,

Am I understanding right, you are not able to Remote Desktop (RDP) into the network from APPDB?

***Edit***

I see what you're saying now.

New Member

Re: Not able to connect from outside IP

Ray,

I am able to connect to the said server via Remote Desktop just fine. The problem is possibly on your side.

On a security note.. I would suggest an alternate approach to allowing access like this. You might want to think about possibly a VPN account and using that to access these devices. Leaving them open to the world over these protocols is extremely dangerous.

Anyway, best of luck!

New Member

Re: Not able to connect from outside IP

hi there

U r using a wrong command for connecting the outside

access-list vrw-vpn-001_splitTunnelAcl standard permit 192.168.50.0 0.0.0.255

access-list vrw-vpn-001_splitTunnelAcl standard permit 192.168.51.0 0.0.0.255

here u use a subnet mask u have to use a wild card mask

try this command once

thanks

102
Views
0
Helpful
4
Replies
CreatePlease to create content