Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Not able to reach the Public IP address

Sir,

My Client has asked to access their client Netmeeting server.

They given one public Ip address 149.223.231.91,and they allowed all ports.

As per their details I given accelist in My firewall

"accesslist Inlist-12-SEP-08 permit tcp object-group net-meeting-private host 149.223.231.91 "

After that i tracert to that Public IP 149.223.231.91 From one of the system which i given access.

but result is it is stopped at other end(UK side).

Today i have a call with client Netsupport Group ,so what sholuld i tell,

and i also tested with Broadband also,same output has come.So Pls let me anything else frm my side.

Tnks

Ramu

Netsupport Gr

CMC Ltd

1 REPLY

Re: Not able to reach the Public IP address

You ACl is incorrect,

change to:-

access-list Inlist-12-SEP-08 permit tcp any host 149.223.231.91 object-group net-meeting-private

HTH>

115
Views
0
Helpful
1
Replies
CreatePlease to create content