Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

number of FWSM on 6513

how many FWSM can be configured on 6513 and whcih command is used to propagate between each FWSM the session slot..... command is not working.

2 REPLIES
Community Member

Re: number of FWSM on 6513

Hi,

below link describes slot availability for FWSM installation.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/hwinstgd.htm#wp35720

To session in to the FWSM from the switch, log in, access privileged mode, and then configuration mode and perform the following steps:

CAT6513# session slot number processor 1

e.g # session slot 9 processor 1

HTH

gagan

Re: number of FWSM on 6513

Friend

You can install 4 FWSM modules in a single chassis

http://www.cisco.com/en/US/products/hw/modules/ps2706/ps4452/index.html

gagan has already posted the way to log on to the different modules

HTH, rate if it does

Narayan

284
Views
3
Helpful
2
Replies
CreatePlease to create content