Assuming that your WVC cameras has private ip address, you would need to NAT it to a public ip address or configure static PAT on the router external ip address to access it from home.
What port does your WVC cameras uses? and do you have a spare public ip address, or are you going to use your router external ip address for static PAT? Can you share the current NAT configuration?
My WVC camera uses the 1024 port. I don't have a spare public IP so I'm going to use my router's external ip address for static PAT.
Here is my current configuration on my Cisco 881 router at work:
Current configuration : 2632 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! boot-start-marker boot-end-marker ! logging message-counter syslog ! no aaa new-model ! crypto pki trustpoint TP-self-signed-xxxxxxxxxxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxxxxxxxxxx revocation-check none rsakeypair TP-self-signed-xxxxxxxxxxx ! ! ip source-route ip dhcp excluded-address 192.168.2.1 ip dhcp excluded-address 192.168.2.100 ! ip dhcp pool ccp-pool import all network 192.168.2.0 255.255.255.0 dns-server x.x.x.x x.x.x.x default-router 192.168.2.1 lease 0 2 ! ! ip cef ip name-server x.x.x.x ip name-server x.x.x.x ! ! ! ! username xxxxxxxxxxx privilege 15 password 0 xxxxxxxxxxx ! ! crypto isakmp policy 9 hash md5 authentication pre-share crypto isakmp key xxxxxxxxxxx address x.x.x.x ! crypto ipsec security-association lifetime seconds 86400 ! crypto ipsec transform-set STRONG ah-md5-hmac esp-3des esp-sha-hmac ! ! crypto map VPN 1 ipsec-isakmp set peer x.x.x.x set transform-set STRONG match address 101 ! ! archive log config hidekeys ! ! ! ! ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface FastEthernet4 description Connection towards Primetel Modem ip address x.x.x.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip flow ingress ip nat outside ip virtual-reassembly duplex auto speed auto crypto map xxx ! interface Vlan1 description Local LAN ip address 192.168.2.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip flow ingress ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 x.x.x.x ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ip nat inside source route-map NONAT interface FastEthernet4 overload ip nat inside source static tcp 192.168.2.100 3389 x.x.x.x 3389 extendable ! ip access-list extended nonat_nat deny ip 192.168.2.0 0.0.0.255 192.168.15.0 0.0.0.255 permit ip 192.168.2.0 0.0.0.255 any ! access-list 15 permit 192.168.2.0 0.0.0.255 access-list 101 permit ip 192.168.2.0 0.0.0.255 192.168.15.0 0.0.0.255 route-map NONAT permit 1 match ip address nonat_nat ! ! control-plane ! ! line con 0 no modem enable line aux 0 line vty 0 4 privilege level 15 password xxxxxxx login local transport input telnet ssh ! scheduler max-task-time 5000 end
Unfortunately, The IP address of the outside insterface has only 1 port with ID 1024, if there is another camara that you need to access, it would be good idea to check if it can listen on another port and do the same forwarding as you did with the first one.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
