Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

pr
New Member

Open for SMTP pix501

Hi

Can any tell me simpel and clear how to open smtp from outside to inside server ?

Because its is not working for me.

Using PAT as translation.

And 192.168.0.5 as mailserver MS Exchange 2007 )

Hope someone can help

Regards Peter Røge

  • Firewalling
8 REPLIES

Re: Open for SMTP pix501

Peter,

Can you post your current config - as there could be multiple reasons why this is not working.

HTH>

pr
New Member

Re: Open for SMTP pix501

Hi

Thanks alot becuse i am in time trouble to

Hopes this help

Peter

Re: Open for SMTP pix501

OK - try to remove;-

static (inside,outside) tcp MAILSERVER smtp MAILSERVER smtp netmask 255.255.255.255 0 0

Replace with:-

static (inside,outside) tcp interface smtp MAILSERVER smtp netmask 255.255.255.255 0 0

Change:-

from

access-list outside_access_in permit tcp any eq smtp host MAILSERVER eq smtp

to

access-list outside_access_in permit tcp any eq smtp host <> eq smtp

HTH>

Re: Open for SMTP pix501

Sorry ignore:-

access-list outside_access_in permit tcp any eq smtp host <> eq smtp

Change to

access-list outside_access_in permit tcp any host <> eq smtp

pr
New Member

Re: Open for SMTP pix501

hi

is it possible to use the word INTERFACE

because i am using PAT ?

in this line:

access-list outside_access_in permit tcp any host <> eq smtp

Peter

Re: Open for SMTP pix501

I suppose so - as long as the IP address is the same as the outside ip address.

pr
New Member

Re: Open for SMTP pix501

Hi

Thanks again

we up running now

Peter

Re: Open for SMTP pix501

np - glad to help.

148
Views
0
Helpful
8
Replies