07-19-2013 05:00 AM - edited 03-11-2019 07:14 PM
Want to check open services of ASA . on router it is show through show control-plane host open-ports . Any idea how to check those on ASA ?
Solved! Go to Solution.
07-19-2013 05:49 AM
Hi,
If you mean the actual ports the ASA itself is listening on then you can use the following command
show asp table socket
Usually this output contains ports depending how you have used the commands "telnet" , "ssh" and "http" commands for management.
- Jouni
07-19-2013 05:38 AM
Hi,
Here is what i would do
#show access-list | in permit tcp
This will show you all the open services.
You can copy that into note pad and search for any specific service.
Hope this helps....
07-19-2013 05:49 AM
Hi,
If you mean the actual ports the ASA itself is listening on then you can use the following command
show asp table socket
Usually this output contains ports depending how you have used the commands "telnet" , "ssh" and "http" commands for management.
- Jouni
07-19-2013 06:09 AM
Yeah... Just saw Jouni's post and i agree. My initial post assumed serivces allowed through the ASA.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: