Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Output modifiers on FWSM logs

I am trying to search through some extensive FWSM logs from a SSH session for a specific IP address

What kind of output modifiers can I use to include or exclude IP addresses when viewing the log?

I am trying show logg I i 172.20.1.5

but it won't take it.

Everyone's tags (4)
2 ACCEPTED SOLUTIONS

Accepted Solutions

Output modifiers on FWSM logs

Hello Colin,

what about


logging enable

logging buffer 7

Show logging | include 172.20.1.5

You should see something, if that is not showing there well that could mean the FWSM is not seeing the traffic at all

We can do a capture to confirm the traffic is getting into the FWSM,

Regards,

Julio

CSC it's a free support community take your time to rate all the engineer's responses that help you resolving your problems.

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com

Output modifiers on FWSM logs

just to add on to Julio's comments, please do ensure the logging buffer-size is big e.g. 10000

Warm regards, Ramraj Sivagnanam Sivajanam Technical Specialist/Service Delivery Manager – Managed Service Department
2 REPLIES

Output modifiers on FWSM logs

Hello Colin,

what about


logging enable

logging buffer 7

Show logging | include 172.20.1.5

You should see something, if that is not showing there well that could mean the FWSM is not seeing the traffic at all

We can do a capture to confirm the traffic is getting into the FWSM,

Regards,

Julio

CSC it's a free support community take your time to rate all the engineer's responses that help you resolving your problems.

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com

Output modifiers on FWSM logs

just to add on to Julio's comments, please do ensure the logging buffer-size is big e.g. 10000

Warm regards, Ramraj Sivagnanam Sivajanam Technical Specialist/Service Delivery Manager – Managed Service Department
338
Views
0
Helpful
2
Replies