Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

outragous bandwidth

i have 10 locations with pix 501's and a VPN tunnel built to my main network witch is at a data-center. my main network at he data-center has a pix 506E

is there any way to tell how much bandwidth each location is eatting up?

3 REPLIES

Re: outragous bandwidth

Hi,

No, the PIX will not allow you to set that up (at least not the 6.x IOS).

You can use device like PacketShaper to shape the traffic, or you can use a SNMP server to get the info from the PIX a build the statistics.

Please rate if this helped.

Regards,

Daniel

Re: outragous bandwidth

i am assuming u use pix 7.x

in this case u can achive it by useing policing and matcing based on the configured vpn tunnle groups

and the fpllowing link useful

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

please, if helful rate

Re: outragous bandwidth

Hi,

PIX 506E does not support 7.x IOS

Cheers,

Daniel

122
Views
0
Helpful
3
Replies
CreatePlease to create content