outragous bandwidth

[Danny Guillory Jr]

i have 10 locations with pix 501's and a VPN tunnel built to my main network witch is at a data-center. my main network at he data-center has a pix 506E

is there any way to tell how much bandwidth each location is eatting up?

[5220]

Hi,

No, the PIX will not allow you to set that up (at least not the 6.x IOS).

You can use device like PacketShaper to shape the traffic, or you can use a SNMP server to get the info from the PIX a build the statistics.

Please rate if this helped.

Regards,

Daniel

[Marwan ALshawi]

i am assuming u use pix 7.x

in this case u can achive it by useing policing and matcing based on the configured vpn tunnle groups

and the fpllowing link useful

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

please, if helful rate

[5220]

Hi,

PIX 506E does not support 7.x IOS

Cheers,

Daniel