1. Ping 192.168.2.5 from the firewall annd make sure its successful.
2. Try a packet tracer and check if its successful
packet-tracer input outside tcp 1025 188.8.131.52 80 detailed. Check the output to see if the pacet is getting dropped in any of the phases. If the packet is getting dropped in any of the phases, please paste the output here.
3. apply captures on the inside and the outside interface and check to see if packets are going through the firewall in both directions.Please paste the output of the capture here. Please refer to the link below for info on how to apply captures on PIX
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...