Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Outside Interface IP address

I woder if using ASA or PIX, can I set up the outside interface with 1 IP then for outgoing (on the same outside interface) with another IP address. For example: outside IP 1.2.3.4 then somehow for outgoing(return traffic if you will) the IP address to be visible is 1.2.4.5 (partner requirement, don't ask :) ).

Doing this on Linux iptable already and now is thinking to change it out to something else,i.e. ASA or PIX.

Thank you for your hep.

2 REPLIES
Cisco Employee

Re: Outside Interface IP address

use :

nat (inside) 1 0 0

global (outside) 1 1.2.4.5

All outbound traffic will be translated to 1.2.4.5

If you use ;

global (outside) 1 interface

Interface ip will be used for xlation purpose.

Do rate helpful posts.

Regards,

Sushil

New Member

Re: Outside Interface IP address

Thank you, will try that.

117
Views
0
Helpful
2
Replies