Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

p to p

I all we are going to terminate point to point link between 3750 and 6506.

on 6506

int gi1/45

no switchport access

ip address 192.X.0.x 255.255.255.0

no shut

routes

ip route 172.16.X.0 255.255.255.0 192.168.0.53

172.16.200.1 is the vlan created on 3750

on 3750 stack switch

int gi1/01

no switchport

ip address 192.X.0.x 255.255.255.0

no shut

ip route 0.0.0.0  0.0.0.0 192.168.0.54

vlan created

int vlan 220

ip address 172.16.X.1 255.255.255.0

Does this config correct as i am configuring between stack switch and 6506

1 REPLY

p to p

Hello Prashant,

The configuration looks good to me!

The right routes, right interface configuration.

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
190
Views
0
Helpful
1
Replies
CreatePlease to create content