Cisco Support Community
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

pdm and ca authentication fingerprint

Hi all

I cant access From PDM my pix515 device.

When I put ca enroll with all requested options , is going to tell -

% No CA root cert exists. Use "ca authenticate"

but that step i done successfully

can you help me ?

what is optional fingerprint ? is it really optional?

thank you


Re: pdm and ca authentication fingerprint

This document demonstrates how to configure an IPSec VPN tunnel between a PIX Firewall and a Cisco VPN Client 4.0.x. The configuration example in this document also highlights the certification authority (CA) enrollment procedure for both the Cisco IOS? router and the Cisco VPN Client, as well as the use of a Smartcard as a certificate storage.

Community Member

Re: pdm and ca authentication fingerprint


thank you for this document !

maybe i cant explain first of all i need to connect with pix tough PDM , which is going to tell me that certificate i incorrect.

what can i do for that?

the pix is as....

Cisco PIX Firewall Version 6.3(4)

Cisco PIX Device Manager Version 3.0(2)

Compiled on Fri 02-Jul-04 00:07 by morlee

pix515ekesh up 3 days 23 hours

Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz

Flash E28F128J3 @ 0x300, 16MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: ethernet0: address is 000f.243f.5103, irq 10

1: ethernet1: address is 000f.243f.5104, irq 11

2: ethernet2: address is 0002.b3ec.3707, irq 11

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES-AES: Disabled

Maximum Physical Interfaces: 3

Maximum Interfaces: 5

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

This PIX has a Restricted (R) license.

CreatePlease to create content