here's the scenario ... I need to upgrade a remote site router's IOS code using TFTP. The remote site router has a VPN tunnel connecting to a central firewall ASA 5520. The TFTP server is located on the inside interface of the firewall.
There is no outside or inside ACL on the router.
My questions are:
1. Do I need to do a static (inside,outside) statement for the TFTP server?
2. Must the transfer go through the VPN tunnel or simply via the outside interfaces of both the router and firewall?
3. Since the copy tftp flash command is issued on the router, is it safe to say that the router initiates the session rather than the TFTP server? In which case I must allow the port access only on the outside access list of the firewall, correct?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...