Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX 501 and Internet Acess

My network is very simple, like this: A DSL Modem is connected to a Cisco PIX 501 firewall/router, and a computer is connected to this firewall.

Now this PIX 501 box has two interfaces: Inside (192.168.1.1) and the netwroked PC (192.168.1.2). The outside interface is set to DHCP to be dynamically assigned an IP by the ISP's DNS server (192.168.0.1).

My networked PC (running Windows XP) is configured with an static IP (192.168.1.2), default Gateway (192.168.1.1 which is the PIX 501), and the DNS IP (192.168.0.1 which is the ISP's DNS Server).

But I can NOT access the internet. I can Ping 192.168.1.1 (the inside interface) but not the outside (192.168.0.1).

What am I missing and what should I do?

Thanks

Scott

3 REPLIES
Green

Re: PIX 501 and Internet Acess

post your config...

New Member

Re: PIX 501 and Internet Acess

I am using PDM (the GUI tool) to access and configure the PIX box. While I am on the PDM, what is the command for me to get the "config"? (The PDM do a Command Line option).

Cisco Employee

Re: PIX 501 and Internet Acess

In your browser go to:

https:///config/

And then paste the output.

David.

124
Views
0
Helpful
3
Replies
CreatePlease to create content