Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Pix 501 and using PHP includes with domain name

Hi,

I'm really new to using a firewall, and need some help.

I have a leased PIX 501.

When I had this added to my server, my PHP  includes on my website that use the URL <?php include ('http://www.mydomain.com/footer.php');?>

those files show up as not found.

I really don't have the option to make the paths relative, do you have any ideas? My support told me that I can add some rules to the firewall and that should cure this problem.

Thanks!

Everyone's tags (3)
1 REPLY
Bronze

Re: Pix 501 and using PHP includes with domain name

You may need to enable DNS doctoring to get this working properly. If you're using static NAT translations you'll need to remove the NAT entry and re-enter it with 'dns' tacked on at the end.

FROM:

static (inside,outside) 66.55.12.33 192.168.1.33 netmask 255.255.255.255

TO:

static (inside,outside) 66.55.12.33 192.168.1.33 netmask 255.255.255.255 dns

After re-entering the entry you may need to clear the xlate as well.
Good luck!
James

218
Views
0
Helpful
1
Replies