Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Pix 501 and VLAN

Hi,

Can a Pix 501 together with a VLAN capable switch be used to route internet traffic to and from the VLANs?

Hardware: I have a Pix 501 (OS 6.3), and a Linksys SRW2016 switch on which I've created a couple of VLANs.

So, is it possible?

Thank you,

Rune

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Pix 501 and VLAN

The 501 only has 2 interfaces. 1 outside and 1 inside (4 switch ports). It does not support logical interfaces (Vlan trunking) so your switch would have to do the routing for the VLans.

Hope this helps!

Chad

Please rate if this helps.

2 REPLIES
Silver

Re: Pix 501 and VLAN

The 501 only has 2 interfaces. 1 outside and 1 inside (4 switch ports). It does not support logical interfaces (Vlan trunking) so your switch would have to do the routing for the VLans.

Hope this helps!

Chad

Please rate if this helps.

New Member

Re: Pix 501 and VLAN

Chad,

Yup, it clarifies what my pix can do. Unfortunately it is not the answer I wanted, as my switch is only a layer2 type switch. :-(

Thanks anyway,

Rune

317
Views
0
Helpful
2
Replies
CreatePlease to create content