Cisco Support Community
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

PIX 501 config review

I'm about to use a new PIX 501 firewall.

I've attached the configuration I intend to use.
I simply need to allow all outbound traffic, and allow inbound traffic only on specific IPs/ports to specific IPs/ports as in the "static" commands
Do you think this config will work?
Any recommendations?
Thanks in advance
interface ethernet0 10baset
interface ethernet1 10full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password bla1 encrypted
passwd bla2 encrypted
hostname F-PHL-01
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
pager lines 100
mtu outside 1500
mtu inside 1500
ip address outside xx.xx.51.34
ip address inside
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 xx.xx.51.35-xx.xx.51.62 netmask
nat (inside) 1 0 0
static (inside,outside) tcp xx.xx.51.39 80 80 netmask
static (inside,outside) tcp xx.xx.51.40 80 80 netmask
static (inside,outside) tcp xx.xx.51.41 80 80 netmask
static (inside,outside) tcp xx.xx.51.42 80 80 netmask
static (inside,outside) tcp xx.xx.51.43 80 80 netmask
static (inside,outside) tcp xx.xx.51.47 80 80 netmask
static (inside,outside) tcp xx.xx.51.48 80 80 netmask
static (inside,outside) tcp xx.xx.51.48 443 443 netmask
static (inside,outside) tcp xx.xx.51.48 53 53 netmask
static (inside,outside) udp xx.xx.51.48 53 53 netmask
static (inside,outside) tcp xx.xx.51.49 80 80 netmask
static (inside,outside) tcp xx.xx.51.50 80 80 netmask
static (inside,outside) tcp xx.xx.51.53 80 80 netmask
static (inside,outside) tcp xx.xx.51.54 80 80 netmask
static (inside,outside) tcp xx.xx.51.61 80 80 netmask
route outside xx.xx.51.33 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http inside
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps
floodguard enable
telnet inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Community Member

This discussion has been

This discussion has been reposted from Cisco User Groups to the Firewalling community.

CreatePlease to create content