08-25-2014 07:02 PM - edited 03-11-2019 09:40 PM
I have a Pix 501 firewall. I can use putty and login. My Pc's are connecting by receiving ip addresses. I am wanting to connect using browser to do some additional setup. It used to work at https://192.168.1.1. Please look at the config and tell me where I am missing.
Thank you
08-25-2014 10:50 PM
Make sure that the ASDM is located on the flash by issuing the dir command
locate the ASDM image file name (if it is not there you will need to copy it into flash)
then highlight and copy the whole filename (it will look something like this: asdm613.bin)
Then add the following command to your pix
asdm image flash:/asdm613.bin
remember to replace asdm613.bin with your actual asdm file name.
--
Please remember to select a correct answer and rate helpful posts
08-26-2014 02:38 AM
For the PIX501, you need a PDM-image and not an ASDM-image. Hopefully you still have it in flash, it seems that it's not available anymore at cisco.com. Here is a link for troubleshooting the PDM:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide