Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 501 - Power issues

I have a PIX 501 that has been working great but on my PC today I lost connectivity. When I looked at my PIX the VPN light was blinking rapidly. I did not have VPN setup but everytime it gets plugged in the VPN light is the only LED that lights up and blinks rapidly. Is my PIX fried? Is there any way to reset it from outside on the PIX, hard reset? Thanks

4 REPLIES

Re: PIX 501 - Power issues

Hi

Have you tried checking the logs/status of the pix via the console?

regds

New Member

Re: PIX 501 - Power issues

I cant even get in through the console, nothing happens.

Re: PIX 501 - Power issues

This is an issue with the POWER CORD. When the power plug moves a little (Heavy vibrations) bit the PIX hangs and nothing work.

Unplug the Power plug and put it in again.

Have the same problem on mine.

Unfortunately there is nothing that you can do, this is a hardware issue and if the guarantee has expired you have to live with that.

sincerely

Patrick

New Member

Re: PIX 501 - Power issues

Still no luck. I have a feeling it is fried but at this point I will try anything.

372
Views
0
Helpful
4
Replies
CreatePlease to create content