Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 501 - routing and NAT capability question

I have a PIX 501 on order, but I want to know before I get it:

- Can the PIX 501 support routes to multiple noncontiguous IP subnets over a single tunnel? (i.e. routing 172.16.0.8/29 and 10.0.0.0/8 over the same tunnel)

- Can the PIX 501 support multiple NAT addresses on the same interface (i.e. one overloaded address and 4 or 5 static entries)

Thanks,

Chris

2 REPLIES
New Member

Re: PIX 501 - routing and NAT capability question

Hi Chris,

both are totally doable, for the first you will need to specify two lines in the crypto access list each for a seperate network.

and the other one is simple and straight forward and easily done ;)

regards,

Shadi`

New Member

Re: PIX 501 - routing and NAT capability question

Great, Thanks!

139
Views
5
Helpful
2
Replies
CreatePlease login to create content