Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Pix 501

Hi,

My pix 501 sh ver

Cisco PIX Firewall Version 6.2(2)

Cisco PIX Device Manager Version 2.0(2)

Compiled on Fri 07-Jun-02 17:49 by morlee

DR-PIX up 12 days 19 hours

Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz

Flash E28F640J3 @ 0x3000000, 8MB

BIOS Flash E28F640J3 @ 0xfffd8000, 128KB

0: ethernet0: address is 000b.bed3.80b3, irq 9

1: ethernet1: address is 000b.bed3.80b4, irq 10

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES: Disabled

Maximum Interfaces: 2

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: 50

Throughput: Limited

IKE peers: 5

If we look the doc..it says Maximum concurrent connections-7500 and

10 User License Support for up to ten concurrent connections from different

source IP addresses on the internal network to traverse the

firewall. Also provides DHCP server support for up to 32 leases.

50 User License Support for up to 50 concurrent connections from different

source IP addresses on the internal network to traverse the

firewall. Also provides DHCP server support for up to 128 leases.

Unlimited User License Support for an

unlimited number of concurrent connections from

different source IP addresses on the internal network to traverse

the firewall. Also provides DHCP server support for up to 256

leases.

All the doc are saying about from inside number of host to outside conn..My concern is i m having one server in inside interface.I wanted to access this from some 300 hosts from outside..Is it my pix 501 will support the conn? r how many conn form outside to inside it would support.I think 50 hosts..Kindly provide me info...

4 REPLIES
Community Member

Re: Pix 501

Hi,

Pls provide information as soon.

Cisco Employee

Re: Pix 501

from outside to inside Pix does not consider/count the source from where you would be coming as a host defined in license feature, therefore you can have your internal server access from 200 outside machines..you are safe don't worry about the limit

example :-

static (inside,outside)

this one public ip accounts for one entry in local host table, doesn't matter how many hosts access this pubic ip

Community Member

Re: Pix 501

Thank you very much...

so Limits all about the how many inside systems we are having..

Cisco Employee

Re: Pix 501

yes

264
Views
4
Helpful
4
Replies
CreatePlease to create content